Evaporator Expansion and Extraction Vessels
Glass Expansion Torch Adaptor for Ball Joint Injector. Cassette Mount Adaptor for Ball Joint Injector. This adaptor is suitable for injectors with a ball joint. Compatible with PerkinElmer Elan DRC versions, NexION 300/350.
Cassette Mount Adaptor for Ball Joint Injector (W1012406). This adaptor is suitable for injectors with a ball joint. This torch adaptor is usually used with PerkinElmer Elan DRC models.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Skimmer ConeGuard PerkinElmer Elan Series
Skimmer ConeGuard PerkinElmer Elan Series. For use with PerkinElmer 6000/9000/DRCII/DRC-E ICP-MS skimmer cones to protect cone threads during cleaning. Compatible with Nickel Skimmer Cone NC1585740 and Platinum Skimmer Cone 501907683. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When cones are not in use, keep them stored in original packaging for protection.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Guardian Probe for Cetac ASX-112FR
Guardian Probe for ASX-112FR, probe only. Compatible with Teledyne Cetac ASX-112FR autosampler. Requires a UniFit sample capillary available in IDs of 0.18mm (P/N 70-803-2085), or 0.25mm (P/N 70-803-2030). The unique, robust tip design eliminates crushed and damaged tips due to misalignment. Drip-resistance prevents cross contamination of samples during probe movement, especially with oils. Built-in particle filtering holds back particulates from blocking the line. Completely inert design, all PEEK and PTFE construction, the Guardian autosampler probe provides exceptional resistance to strong acids and solvents.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion DuraMist DC Nebulizer 1mL/min compatible with Thermo Pro, 6000 series and 7000 series ICP-OES.
DuraMist DC Nebulizer 1.0mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 31 with ratchet connector (1 pc). Compatible with Thermo Pro, 6000 Series and 7000 Series ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate is 1.0mL/min. Recommended not to exceed optimum 1.0mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, it tolerates up to 5% HF.Replacement parts include P/Ns NC1625341 and 501907300.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Semi-Demountable Torch Adaptor Thermo X-Series
Semi-Demountable Torch Adaptor. Compatible with Glass Expansion’s semi-demountable torch for Thermo X-Series ICP-MS. For use with X-Series semi-demountable torch body 31-808-1009. Injector options include Tapered Alumina Injector 1.5mm (501907125, 31-808-1013), Sapphire Injector 2.0mm (501907171, 31-808-3001) and Platinum Injector 1.5mm (31-808-1256).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion OpalMist DC Nebulizer 1.0mL/min, high purity PFA, compatible with Thermo Q, RQ and TQ.
OpalMist DC Nebulizer 1.0mL/min, includes UniFit Connector with 0.5mm ID x 1.6mm OD x 700mm long tubing (1 pc) & DC Gas Fitting Type 31 with ratchet connector (1 pc). Compatible with Thermo Q, RQ and TQ.Optimum nebulizer gas flow rate is 1.0L/min & sample flow rate is 1.0mL/min. Recommended not to exceed optimum 1.0mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. OpalMist is made from high purity PFA resulting in the lowest background & exceptional resistance to HF. Tolerates up to 15% TDS & 75um particulates.Replacement parts include P/Ns NFT-16-50 & 501907289.Recommended nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Probe Connecting Line 0.5mm ID (Blue)
Probe Connecting Line 0.5mm ID (Blue). Compatible with Glass Expansion Guardian Probes for Aim Lab & Agilent SPS3/SPS4 Autosamplers (P/N 70-803-1957) and for Teledyne Cetac autosamplers (P/N 70-803-1803). Creates a zero dead-volume connection between Guardian Probe and nebulizer.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Trident CT Mixing Chamber
Trident CT Mixing Chamber. Replacement Trident CT mixing chamber for Glass Expansion’s Trident CT Internal Standard (IS) Kit (P/Ns NC2046960, 60-703-1179). Not for use with HF. For solutions containing HF use Trident IS Kit for HF P/N NC2046964, 60-808-1150.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion UniFit Cap (PKT 10)
UniFit Cap (PKT 10). Replacement UniFit caps for HydraMist spray chamber reductant/sample port.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Adaptor for D-Torch B19
Adaptor for D-Torch B19. Compatible with Glass Expansion D-Torch (P/N 501907035, 30-808-3614) for Spectro (Ametek) Arcos II SOP, Blue SOP & Green SOP/DSOI ICP-OES. Provides a 19mm male ball joint. Replacement O-Rings are P/Ns 70-V-011 and 70-VT-012. Use O-ring removal tool 50-100-1636.For D-Torch Adaptor with 13mm male ball joint P/N 31-808-3596.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Tapered Injector with 0.8mm ID. A 0.8mm ID quartz tapered injector, ideal for use with volatile organic solvent-based matrices. Compatible with Agilent ICP-OES 5100/5110/5800/5900 D-Torch (30-808-3560). Not for use with HF.
Quartz Tapered Injector with 0.8mm ID. A 0.8mm ID quartz tapered injector, ideal for use with volatile organic solvent-based matrices. Compatible with Agilent ICP-OES 5100/5110/5800/5900 D-Torch (30-808-3560). Not suitable for use with HF. When replacing your injector, it is recommended to replace the injector ferrule (31-808-2962), on average every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Semi-Demountable Torch Body Thermo X-Series
Semi-Demountable Torch Body. Compatible with Thermo X-Series ICP-MS. For use with Glass Expansion’s semi-demountable torch adaptor 31-808-0984. Injector options include Tapered Alumina Injector 1.5mm (501907125, 31-808-1013), Sapphire Injector 2.0mm (501907171, 31-808-3001) and Platinum Injector 1.5mm (31-808-1256).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion SeaSpray DC Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1292 Gas Fitting with Ratchet Nebulizer connector. Compatible with Thermo Q, RQ and TQ.
SeaSpray DC Nebulizer 0.4 mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and DC Gas Fitting Type 31 with ratchet connector (1 pc.). Compatible with Thermo Q, RQ and TQ.Optimum nebulizer gas flow rate is 1.0 L/min and sample flow rate is 0.4 mL/min. Recommended not to exceed optimum 0.4 mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read ~40 psi at 1.0 L/min gas flow rate. Can tolerate up to 20% TDS. We recommend the use of the Elegra Argon Humidifier to achieve best performance with high TDS.Replacement parts include P/Ns NFT-16-50 and 501907289.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion MicroMist DC Nebulizer 0.1mL/min 1.6mm
MicroMist DC Nebulizer 0.1 mL/min, includes UniFit Connector with 0.25mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and DC Gas Fitting Type 13/31 with ratchet connector (1 pc.). Compatible with Thermo PRO Duo, PRO Radial, 6000/7000 Duo & Radial Series ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min and sample flow rate is 0.1mL/min. Recommended not to exceed optimum 0.1mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. Can tolerate up to 15% TDS. MicroMist is the standard configuration for many ICP manufacturers due to its excellent sensitivity and precision at low flow rates.Replacement parts include P/Ns NFT-025 and 501907289.Recommend maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001